Generate A Rsa Crypto Key Cisco Router

Mar 27, 2017 You will be unable to complete the crypto key generate rsa command without a hostname and IP domain name. (This situation is not true when you only generate a named key pair.) Note SSH may generate an additional RSA key pair if you generate a key pair on a router having no RSA keys. The additional key pair is used only by SSH and will have a. This article shows how to configure and setup SSH for remote management of Cisco IOS Routers.We’ll show you how to check if SSH is supported by your IOS version, how to enable it, generate an RSA key for your router and finally configure SSH as the preferred management protocol under the VTY interfaces. Any IOS which is a crypto IOS(ssh feature) will have this automatically generated on the switch/router. This crypto is what we use for ssh login. You can also generate one using command 'crypto key generate rsa general-keys modulus 1024 '. Create a 2048 bit RSA key. Router(config)#crypto key generate rsa general-keys Label keypairname modulus 2048! Generates 2048 bit RSA key pair. 'keypairname' defines the name of the key pair. Create a trustpoint. A trustpoint represents a trusted CA. Router(config)#crypto pki trustpoint ms-ca-name! Creates the trustpoint. Nov 23, 2011  Solved: Hi, i have a switch 2960 24TC-L with c2960-lanbasek9-mz.150-1.SE.bin and SSH v1 enabled. When i try to enable SSH v2 the swith tell me that i have to create a crypto key rsa. I generated the crypto key rsa with 1024 bits and when i try to. This lesson explains how to configure SSH Public Key Authentication on Cisco IOS using Windows and Linux. Let’s generate a 2048 bit RSA key pair: R1(config)#crypto key generate rsa modulus 2048 The name for the keys will be: R1.NETWORKLESSONS.LOCAL% The key modulus size is 2048 bits% Generating 2048 bit RSA keys, keys will be non.

• Generate A Rsa Crypto Key Cisco Router Download
• How To Generate A Rsa Crypto Key Cisco Router
• Generate A Rsa Crypto Key Cisco Router Login
• Crypto Key Generate Rsa Command
• Generate A Rsa Crypto Key Cisco Router Ip
• Cisco Switch Can't Generate Crypto Key Rsa

Contents

Introduction

Secure Shell (SSH) is a protocol which provides a secure remote access connection to network devices. Communication between the client and server is encrypted in both SSH version 1 and SSH version 2. Implement SSH version 2 when possible because it uses a more enhanced security encryption algorithm.

This document discusses how to configure and debug SSH on Cisco routers or switches that run a version of Cisco IOS^® Software that supports SSH. This document contains more information on specific versions and software images.

Prerequisites

Requirements

The Cisco IOS image used must be a k9(crypto) image in order to support SSH. For example c3750e-universalk9-tar.122-35.SE5.tar is a k9 (crypto) image.

Components Used

The information in this document is based on Cisco IOS 3600 Software (C3640-IK9S-M), Release 12.2(2)T1.

SSH was introduced into these Cisco IOS platforms and images:

• SSH Version 1.0 (SSH v1) server was introduced in some Cisco IOS platforms and images that start in Cisco IOS Software Release 12.0.5.S.

• SSH client was introduced in some Cisco IOS platforms and images starting in Cisco IOS Software Release 12.1.3.T.

• SSH terminal-line access (also known as reverse-Telnet) was introduced in some Cisco IOS platforms and images starting in Cisco IOS Software Release 12.2.2.T.

• SSH Version 2.0 (SSH v2) support was introduced in some Cisco IOS platforms and images starting in Cisco IOS Software Release 12.1(19)E.

• Refer to How to Configure SSH on Catalyst Switches Running CatOS for more information on SSH support in the switches.

  Several years ago I did the same thing with my original DVD copy of the game. Mass effect 1 cd key generator replacement.

Refer to the Software Advisor (registered customers only) for a complete list of feature sets supported in different Cisco IOS Software releases and on different platforms.

The information presented in this document was created from devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If you are in a live network, make sure that you understand the potential impact of any command before you use it.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

SSH v1 vs. SSH v2

Use the Cisco Software Advisor (registered customers only) in order to help you find the version of code with appropriate support for either SSH v1 or SSH v2.

Network Diagram

Test Authentication

Authentication Test without SSH

First test the authentication without SSH to make sure that authentication works with the router Carter before you add SSH. Authentication can be with a local username and password or with an authentication, authorization, and accounting (AAA) server that runs TACACS+ or RADIUS. (Authentication through the line password is not possible with SSH.) This example shows local authentication, which lets you Telnet into the router with username 'cisco' and password 'cisco.'

Authentication Test with SSH

In order to test authentication with SSH, you have to add to the previous statements in order to enable SSH on Carter and test SSH from the PC and UNIX stations.

At this point, the show crypto key mypubkey rsa command must show the generated key. After you add the SSH configuration, test your ability to access the router from the PC and UNIX station. If this does not work, see the debug section of this document.

Optional Configuration Settings

Prevent Non-SSH Connections

If you want to prevent non-SSH connections, add the transport input ssh command under the lines to limit the router to SSH connections only. Straight (non-SSH) Telnets are refused.

Test to make sure that non-SSH users cannot Telnet to the router Carter.

Set Up an IOS Router or Switch as SSH Client

There are four steps required to enable SSH support on a Cisco IOS router:

1. Configure the hostname command.

2. Configure the DNS domain.

3. Generate the SSH key to be used.

4. Enable SSH transport support for the virtual type terminal (vtys).

If you want to have one device act as an SSH client to the other, you can add SSH to a second device called Reed. These devices are then in a client-server arrangement, where Carter acts as the server, and Reed acts as the client. The Cisco IOS SSH client configuration on Reed is the same as required for the SSH server configuration on Carter.

Issue this command to SSH from the Cisco IOS SSH client (Reed) to the Cisco IOS SSH server (Carter) in order to test this:

• SSH v1:

• SSH v2:

Setup an IOS Router as an SSH server that performs RSA based User Authentication

Complete these steps in order to configure the SSH server to perform RSA based authentication.

1. Specify the Host name.

2. Define a default domain name.

3. Generate RSA key pairs.

4. Configure SSH-RSA keys for user and server authentication.

5. Configure the SSH username.

6. Specify the RSA public key of the remote peer.

7. Specify the SSH key type and version. (optional)

8. Exit the current mode and return to privileged EXEC mode.

   Note: Refer to Secure Shell Version 2 Support for more information.

Add SSH Terminal-Line Access

If you need outbound SSH terminal-line authentication, you can configure and test SSH for outbound reverse Telnets through Carter, which acts as a comm server to Philly.

If Philly is attached to Carter's port 2, then you can configure SSH to Philly through Carter from Reed with the help of this command:

• SSH v1:

• SSH v2:

You can use this command from Solaris:

Restrict SSH access to a subnet

You need to limit SSH connectivity to a specific subnetwork where all other SSH attempts from IPs outside the subnetwork should be dropped.

You can use these steps to accomplish the same:

1. Define an access-list that permits the traffic from that specific subnetwork.

2. Restrict access to the VTY line interface with an access-class.

This is an example configuration. In this example only SSH access to the 10.10.10.0 255.255.255.0 subnet is permitted, any other is denied access.

Note: The same procedure to lock down the SSH access is also applicable on switch platforms.

Configure the SSH Version

Configure SSH v1:

Configure SSH v2:

Configure SSH v1 and v2:

Note: You receive this error message when you use SSHv1:

Note: Cisco bug ID CSCsu51740 (registered customers only) is filed for this issue. Workaround is to configure SSHv2.

Variations on banner Command Output

The banner command output varies between the Telnet and different versions of SSH connections. This table illustrates how different banner command options work with various types of connections.

Unable to Display the Login Banner

SSH version 2 supports the login banner. The login banner is displayed if the SSH client sends the username when it initiates the SSH session with the Cisco router. For example, when the Secure Shell ssh client is used, the login banner is displayed. When the PuTTY ssh client is used, the login banner is not displayed. This is because Secure Shell sends the username by default and PuTTY does not send the username by default.

The Secure Shell client needs the username to initiate the connection to the SSH enabled device. The Connect button is not enabled if you do not enter the host name and username. This screenshot shows that the login banner is displayed when Secure Shell connects to the router. Then, the login banner password prompt displays.

Generate A Rsa Crypto Key Cisco Router Download

The PuTTY client does not require the username to initiate the SSH connection to the router. This screenshot shows that the PuTTY client connects to the router and prompts for the username and password. It does not display the login banner.

This screen shot shows that the login banner is displayed when PuTTY is configured to send the username to the router.

debug and show Commands

Before you issue the debug commands described and illustrated here, refer to Important Information on Debug Commands. Certain show commands are supported by the Output Interpreter Tool (registered customers only) , which allows you to view an analysis of show command output.

• debug ip ssh—Displays debug messages for SSH.

• show ssh—Displays the status of SSH server connections.

• show ip ssh—Displays the version and configuration data for SSH.

  • Key generator for mathematica 10.2 windows 10. Version 1 Connection and no Version 2

  • Version 2 Connection and no Version 1

  • Version 1 and Version 2 Connections

Sample Debug Output

Router Debug

Note: Some of this good debug output is wrapped to multiple lines because of spatial considerations.

Server Debug

Note: This output was captured on a Solaris machine.

What can go Wrong

These sections have sample debug output from several incorrect configurations.

SSH From an SSH Client Not Compiled with Data Encryption Standard (DES)

Solaris Debug

Router Debug

Bad Password

Router Debug

How To Generate A Rsa Crypto Key Cisco Router

SSH Client Sends Unsupported (Blowfish) Cipher

Generate A Rsa Crypto Key Cisco Router Login

Router Debug

Geting the '%SSH-3-PRIVATEKEY: Unable to retrieve RSA private key for' Error

Crypto Key Generate Rsa Command

If you receive this error message, it may be caused due to any change in the domain name or host name. In order to resolve this, try these workarounds.

• Zeroize the RSA keys and re-generate the keys.

• If the previous workaround does not work, try these steps:

  1. Zeroize all RSA keys.

  2. Reload the device.

  3. Create new labeled keys for SSH.

Cisco bug ID CSCsa83601 (registered customers only) has been filed to address this behaviour.

Generate A Rsa Crypto Key Cisco Router Ip

Troubleshooting Tips

Cisco Switch Can't Generate Crypto Key Rsa

• If your SSH configuration commands are rejected as illegal commands, you have not successfully generated a RSA key pair for your router. Make sure you have specified a host name and domain. Then use the crypto key generate rsa command to generate an RSA key pair and enable the SSH server.

• When you configure the RSA key pair, you might encounter these error messages:

  1. No hostname specified

     You must configure a host name for the router using the hostname global configuration command.

  2. No domain specified

     You must configure a host domain for the router using the ip domain-name global configuration command.

• The number of allowable SSH connections is limited to the maximum number of vtys configured for the router. Each SSH connection uses a vty resource.

• SSH uses either local security or the security protocol that is configured through AAA on your router for user authentication. When you configure AAA, you must ensure that the console is not running under AAA by applying a keyword in the global configuration mode to disable AAA on the console.

• No SSH server connections running.

  This output suggests that the SSH server is disabled or not enabled properly. If you have already configured SSH, it is recommended that you reconfigure the SSH server in the device. Complete these steps in order to reconfigure SSH server on the device.

  1. Delete the RSA key pair. After the RSA key pair is deleted, the SSH server is automatically disabled.

     Note: It is important to generate a key-pair with at least 768 as bit size when you enable SSH v2.

     Caution: This command cannot be undone after you save your configuration, and after RSA keys have been deleted, you cannot use certificates or the CA or participate in certificate exchanges with other IP Security (IPSec) peers unless you reconfigure CA interoperability by regenerating RSA keys, getting the CA's certificate, and requesting your own certificate again.Refer to crypto key zeroize rsa - Cisco IOS Security Command Reference, Release 12.3 for more information on this command.

  2. Reconfigure the hostname and domain name of the device.

  3. Generate an RSA key pair for your router, which automatically enables SSH.

     Refer to crypto key generate rsa - Cisco IOS Security Command Reference, Release 12.3 for more information on the usage of this command.

     Note: You can receive the SSH2 0: Unexpected mesg type received error message due to a packet received that is not understandable by the router. Increase the key length while you generate rsa keys for ssh in order to resolve this issue.

  4. Configure SSH server. In order to enable and configure a Cisco router/switch for SSH server, you can configure SSH parameters. If you do not configure SSH parameters, the default values are used.

     ip ssh {[timeout seconds] [authentication-retries integer]}

     Refer to ip ssh - Cisco IOS Security Command Reference, Release 12.3 for more information on the usage of this command.

Related Information